document.write('');
document.write('');
document.write('');
document.write('');
document.write('');
document.write('');
document.write('
Selected Articles in Journals
');
document.write('- Waheed B. Bello, Satya R.T. Peddada, Anurag Bhattacharyya, Lawrence E. Zeidner, James T. Allison, and Kai A. James. \'Multi-Physics 3D Component Placement and Routing');
document.write('Optimization Using Geometric Projection.\' ASME JMD, to appear.
');
document.write('- M. Sadman Sakib, D. Todd Griffith, Saeid Bayat, James T. Allison, and MD Sanower Hossain. \'Intracycle RPM Control for Offshore Vertical Axis Wind Turbines.\' Wind Energy, to appear, DOI: doi.org/10.1002/we.2885.
');
document.write('- Athul K. Sundarrajan, Yong Hoon Lee, James T. Allison, Daniel S. Zalkind, and Daniel R. Herber. \'Open-Loop Control Co-Design of Semi-Submersible Floating Offshore Wind Turbines using Linear Parameter-Varying Models.\' To appear in the ASME Journal of Mechanical Design, accepted October 2023.
');
document.write('- Saeid Bayat, James T. Allison. \'SS-MPC: A User-Friendly Software Based on Single Shooting Optimization to Solve Model Predictive Control Problems.\' Software Impacts, Volume 17, p. 100566, 2023, DOI: 10.1016/j.simpa.2023.100566.
');
document.write('- Satya R.T. Peddada, Nathan M. Dunfield, Lawrence E. Zeidner, Zane Givans, Kai James, and James T. Allison. \'Enumeration and Identification of Unique 3D Spatial Topologies of Interconnected Engineering Systems Using Spatial Graphs.\' ASME Journal of Mechanical Design. Published online, to appear in print. JMD Featured Article. DOI: 10.1115/1.4062978
');
document.write('- Albert E. Patterson, Charul Chadha, Iwona M. Jasiuk, and James T. Allison. \'Tensile Behavior of Individual Fibers and Films Made via Material Extrusion Additive Manufacturing.\' Next Materials, published online, to appear in print, 2023. DOI: 10.1016/j.nxmate.2023.100002
');
document.write('- Satya R.T. Peddada, Lawrence E. Zeidner, Horea T. Ilies, Kai A. James, and James T. Allison. \'Towards a Holistic Design of Spatial Packaging of Interconnected Systems with Physical Interactions (SPI2).\' ASME Journal of Mechanical Design, 144(12), December 2022. JMD Featured Article. DOI: 10.1115/1.4055055
');
document.write('- Albert E. Patterson, James T. Allison. \'Minimally-Restrictive Manufacturability Constraints in Mechanical Design: Mapping and Enforcement.\' ASME Open Journal Engineering, April 2022. DOI: 10.1115/1.4054170
');
document.write('- James T. Allison, Michel-Alexandre Cardin, Chris McComb, Max Yi Ren, Daniel Selva, Conrad Tucker, Paul Witherell, Yaoyao Fiona Zhao. \'Special Issue: Artificial Intelligence and Engineering Design.\' ASME Journal of Mechanical Design, 144(2), February 2022. Invited editorial. DOI: 10.1115/1.4053111
');
document.write('- Cui, Tonghui, James T. Allison, and Pingfeng Wang. \"Reliability-based control co-design of horizontal axis wind turbines.\" Structural and Multidisciplinary Optimization, 64 (6): p. 3653–3679, December 2021. DOI: 10.1007/s00158-021-03046-3');
document.write('
');
document.write('- Albert E. Patterson, Yong Hoon Lee, and James T. Allison. \'Generation and Enforcement of Process-Driven Manufacturability Constraints: A Survey of Methods and Perspectives for Product Design.\' ASME Journal of Mechanical Design, 143(11), p. 110801, November 2021. DOI: 10.1115/1.4050740
');
document.write('- Albert E. Patterson, Charul Chadha, Iwona M. Jasiuk, James T. Allison. \'Fracture testing of polymer materials processed via fused filament fabrication: a survey of materials, methods, and design applications.\' Progress in Additive Manufacturing, June 2021. DOI: 10.1007/s40964-021-00196-0
');
document.write('- Albert Patterson, Tais Rocha Pereira, James T. Allison, Sherri L. Messimer. \'IZOD Impact Properties of Full-density Fused Deposition Modeling Polymer Materials with Respect to Raster Angle and Print Orientation.\' Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 235(10), p. 1891-1908, May 2021. DOI: 10.1177/0954406219840385
');
document.write('- Satya R.T. Peddada, Kai A. James, and James T. Allison. \'A Novel Two-stage Design Framework for 2D Spatial Packing of Interconnected Components.\' ASME Journal of Mechanical Design, 143(3), p. 031706, March 2021. Invited article for special issue. DOI: 10.1115/1.4048817
');
document.write('- Alex Jessee, Satya R.T. Peddada, Danny J. Lohan, Kai A. James, James T. Allison. \'Simultaneous Packing and Routing Optimization using Geometric Projection.\' ASME Journal of Mechanical Design, 142(11), p. 111702, Nov 2020. DOI: 10.1115/1.4046809
');
document.write('- Zitao Liao, Danny J. Lohan, Nathan C. Brooks, James T. Allison, Robert C.N. Pilawa-Podgurski. \"A Systematic Design Methodology for Series-Stacked Energy Decoupling Buffers Based on Loss-Volume Pareto Optimization,\" IEEE Journal of Emerging and Selected Topics in Power Electronics, 8(3), September 2020, p. 2192-2205. DOI: 10.1109/JESTPE.2020.2987347
');
document.write('- Vedant, James T. Allison. \'Pseudo-Rigid-Body Dynamic Models for Design of Compliant Members.\' ASME Journal of Mechanical Design, 142(3), p. 031116, March 2020. Invited article for special issue. DOI: 10.1115/1.4045602
');
document.write('- Tonghui Cui, James T. Allison, and Pingfeng Wang. \'A Comparative Study of Formulations and Algorithms For Reliability-based Co-Design Problems.\' ASME Journal of Mechanical Design, 142(3), p. 031104, March 2020. Invited article for special issue. DOI: 10.1115/1.4045299
');
document.write('- Satya R T Peddada, Pamela J Tannous, Andrew G Alleyne, James T Allison. \'Optimal Sensor Placement Methods in Active High Power Density Electronic Systems with Experimental Validation.\' ASME Journal of Mechanical Design, 142(2), February 2020. DOI: 10.1115/1.4044744
');
document.write('- Danny J Lohan, James Allison, Ercan M Dede. \'A Study on Practical Objectives and Constraints for Heat Conduction Topology Optimization.\' Structural and Multidisciplinary Optimization, 61(2), p. 475–489, February 2020. DOI: 10.1007/s00158-019-02369-6
');
document.write('- Daniel R. Herber, James T. Allison. \'A Problem Class with Combined Architecture, Plant, and Control Design Applied to Vehicle Suspensions.\' ASME Journal of Mechanical Design, 141(10), p. 101401-11, October 2019. DOI:10.1115/1.4043312
');
document.write('- Albert E. Patterson, Charul Chadha, Iwona M. Jasiuk, and James T. Allison. \'Design and Repeatability Analysis of Desktop Tool for Rapid Pre-Cracking of Notched Ductile Plastic Fracture Specimens.\' Engineering Fracture Mechanics, EFM-2019-718, Vol. 217, 106536, August 2019.
');
document.write('- Yong Hoon Lee, Jonathon K. Schuh, Randy H. Ewoldt, James T. Allison. \'Simultaneous Design of Non-newtonian Lubricant and Surface Texture Using Surrogate-based Multiobjective Optimization.\' Structural and Multidisciplinary Optimization, 60(1), p. 99-116, July 2019. DOI: 10.1007/s00158-019-02201-1
');
document.write('- Satya R T Peddada, Daniel R Herber, Herschel Pangborn, Andrew G Alleyne, James T Allison. \'Optimal Flow Control and Single Split Architecture Exploration for Fluid-based Thermal Management.\' ASME Journal of Mechanical Design, 141(8), p. 083401-083401-12, April 2019. DOI:10.1115/1.4043203
');
document.write('- Pamela J Tannous, Satya R T Peddada, James T Allison, Thomas Foulkes, Robert P Pilawa, Andrew G Alleyne. \'Model-based Temperature Estimation of Power Electronics Systems.\' IFAC Control Engineering Practice, 85, p. 206-215, April 2019. DOI: 10.1016/j.conengprac.2019.01.006
');
document.write('- Yashwanth Kumar Nakka, Soon-Jo Chung, James T. Allison, Jack B. Aldrich, and Oscar S. Alvarez-Salazar. \'Nonlinear ODE-PDE Attitude Control of a Spacecraft with Strain-Actuated Solar Arrays.\' AIAA Journal of Guidance, Control, and Dynamics, 42(3), p. 458-475, March 2019. DOI: 10.2514/1.G003478
');
document.write('- Daniel R. Herber, James T. Allison. \'Nested and Simultaneous Solution Strategies for General Combined Plant and Control Design Problems.\' ASME Journal of Mechanical Design, 141(1), p. 011402, Jan 2019. DOI: 10.1115/1.4040705
');
document.write('- Bozun Wang, Yefei Si, Charul Chadha, James T. Allison, Albert E. Patterson. \'Nominal Stiffness Evaluation and Regression Analysis of GT-2');
document.write('Rubber-Fiberglass Timing Belts.\' Robotics, special issue on Kinematics and Robot Design, 7(4), December 2018. DOI: 10.3390/robotics7040075
');
document.write('- Tinghao Guo, Jiarui Xu, Yilin Dong, Neal E. Davis, James T. Allison. \'Network Analysis of Design Automation Literature.\' ASME Journal of Mechanical Design, 140(10), p. 101403, October 2018. DOI: 10.1115/1.4040787.
');
document.write('- William Crossley, Siyao Luan, James T. Allison, Deborah Thurston. \'Optimization Problem Formulation Framework with Application to Engineering Systems.\' Systems Engineering 20(6), p. 512-528, November 2017. Invited contribution to CESUN special issue. DOI: 10.1002/sys.21418
');
document.write('- Anand Deshmukh, James T. Allison. \'Design of Nonlinear Dynamic Systems using Surrogate Models of Derivative Functions.\' ASME Journal of Mechanical Design, 139(10), p. 101402-101402-12, August 2017. DOI: 10.1115/1.4037407
');
document.write('- Christian M. Chilan, Daniel R. Herber, Yashwanth Kumar Nakka, Soon-Jo Chung, James T. Allison, Jack B. Aldrich, Oscar S. Alvarez-Salazar. \'Co-Design of Strain-Actuated Solar Arrays for Spacecraft Precision Pointing and Jitter Reduction.\' AIAA Journal, 55(9), pp. 3180-3195, Sep 2017. DOI: 10.2514/1.J055748
');
document.write('- Jonathon K. Schuh, Yong Hoon Lee, James T. Allison, Randy H. Ewoldt. \'Design-driven modeling of surface-textured full-film lubricated sliding: validation and rationale of non-standard thrust observations.\' Tribology Letters, 65(2), p. 35, Jun 2017. DOI: 10.1007/s11249-017-0818-8
');
document.write('- Daniel R Herber, Tinghao Guo, James T. Allison. \'Enumeration of Architectures with Perfect Matchings.\' ASME Journal of Mechanical Design, 139(5), p. 051403, May 2017. DOI: 10.1115/1.4036132
');
document.write('- Yong Hoon Lee, Jonathon Schuh, Randy H. Ewoldt, James T. Allison. \'Enhancing Full-Film Lubrication Performance via Arbitrary Surface Texture Design.\' ASME Journal of Mechanical Design, 65(2), p. 35, Jun 2017. DOI: 10.1115/1.4036133
');
document.write('- Danny J. Lohan, Ercan M. Dede, James T. Allison, \'Topology Optimization for Heat Conduction Using Generative Design Algorithms.\' Structural and Multidisciplinary Optimization, 55(3), p. 1063–1077, March 2017. DOI: 10.1007/s00158-016-1563-6
');
document.write('- Tinghao Guo, James T. Allison. \'On the Use of Mathematical Programs with Complementary Constraints in Combined Topological and Parametric Design of Biochemical Enzyme Networks. Engineering Optimization. 49(2), p. 345-364, Feb 2017. DOI: 10.1080/0305215X.2016.1188091
');
document.write('- Rebecca Corman, Lakshmi Rao, N. Ashwin Bharadwaj, James T. Allison, Randy H. Ewoldt. \'Setting Material Function Design Targets for Linear Viscoelastic Materials and Structures.\' ASME Journal of Mechanical Design. 138(5), p. 051402, Mar 2016. DOI: 10.1115/1.4032698
');
document.write('- Daniel Herber, Anand Deshmukh, Marlon Mitchell, James T. Allison, \'Project-Based Curriculum for Teaching Analytical Design to Freshman Engineering Students via Reconfigurable Trebuchets.\' Education Sciences, 6(1), article 7, Feb 2016. DOI: 10.3390/educsci6010007
');
document.write('- Anand P Deshmukh, James T Allison. \'Multidisciplinary Dynamic Optimization of Horizontal Axis Wind Turbine Design.\' Structural and Multidisciplinary Optimization, 53(1), pp. 15-27, Jan 2016.. DOI: 10.1007/s00158-015-1308-y
');
document.write('- Ashish Khetan, Danny J. Lohan, James T. Allison. \'Managing Variable-Dimension Structural Optimization Problems using Generative Algorithms\'. Structural and Multidisciplinary Optimization, 50(4), pp. 695-715, Oct 2015.
');
document.write('- Horea Ilies, Matt Parkinson, Carolyn Conner Seepersad, Michael Kokkolaras, Kenneth Ragsdell, Panos Papalambros, Farrokh Mistree, Christopher Williams, Rahul Rai, Jitesh Panchal, Scott Ferguson, Bryony DuPont, James Allison. \'New Perspectives on Design Automation: Celebrating the 40th Anniversary of the ASME Design Automation Conference.\' ASME Journal of Mechanical Design, Vol. 137, No. 5. , 050301, 2015. DOI: 10.1115/1.4030256
');
document.write('- James T. Allison, Tinghao Guo, Zhi Han. \'Co-Design of an Active Suspension Using Simultaneous Dynamic Optimization.\' ASME Journal of Mechanical Design, Vol. 136, No. 8, p. 081003, 2014. DOI: 10.1115/1.4027335
');
document.write('- James T. Allison, Daniel R. Herber. \'Multidisciplinary Design Optimization of Dynamic Engineering Systems.\' AIAA Journal, Vol. 52, No. 4, April 2014. DOI: 10.2514/1.J052182
');
document.write('- James T. Allison. \'Engineering System Co-Design with Limited Plant Redesign.\' Engineering Optimization, Vol. 46, No. 2, p. 200–217, 2014. DOI: 10.1080/0305215X.2013.764999
');
document.write('- James T. Allison \'Plant-Limited Co-Design of an Energy-Efficient Counterbalanced Robotic Manipulator.\' ASME Journal of Mechanical Design, Vol. 135, No. 10, p. 101003, 2013. DOI: 10.1115/1.4024978
');
document.write('- Michael J. Alexander, James T. Allison, Panos Y. Papalambros, and David J. Gorsich. \'Constraint Management of Reduced Representation Variables in Decomposition-Based Design Optimization.\' ASME Journal of Mechanical Design, Vol. 133, No. 10 - Special Issue on Designing Complex Engineered Systems, 2011. DOI: 10.1115/1.4004976
');
document.write('- Michael J. Alexander, James T. Allison, and Panos Y. Papalambros. \'Decomposition-based Design Optimization of Electric Vehicle Powertrains Using Proper Orthogonal Decomposition.\' Invited Article, International Journal of Powertrains, Vol. 1, No. 1, pp.72–92, 2011. DOI: 10.1504/IJPT.2011.041910');
document.write('
');
document.write('- Michael J. Alexander, James T. Allison, and Panos Y. Papalambros. \'Reduced Representations of Vector-Valued Coupling Variables in Decomposition-based Design Optimization.\' Structural and Multidisciplinary Optimization, Vol. 44, No. 3, p. 379-391, 2011. DOI: 10.1007/s00158-011-0636-9
');
document.write('- James T. Allison and Panos Y. Papalambros. \'Consistency Constraint Allocation in Augmented Lagrangian Coordination.\' ASME Journal of Mechanical Design, Vol 132, No. 7, 2010. DOI: 10.1115/1.4001525
');
document.write('- James T. Allison, Michael Kokkolaras, and Panos Y. Papalambros. \'Optimal Partitioning and Coordination Decisions in Decomposition-based Design Optimization.\' ASME Journal of Mechanical Design, Vol. 131, No. 8, 2009. DOI: 10.1115/1.3178729');
document.write('
');
document.write('- [J1] Allison, James T and Kokkolaras, Michael and Papalambros, Panos Y. On Selecting Single-Level Formulations for Complex System Design Optimization. ASME Journal of Mechanical Design. Vol: 129(9), pp. 898-906, September 2007 pdf DOI: 10.1115/1.2747632
');
document.write('
');
document.write('');
document.write('Articles in Conference Proceedings
');
document.write('- Elena Fernández Bravo, James T. Allison. \'Satellite MDO Problem Formulation Using Design Coupling Information.\' To appear in the Proceedings of the 75th International Astronautical Congress, Milan, Italy, October 14-18 2024.
');
document.write('- Elena Fernández Bravo, Melkior Ornik, James T. Allison. \'Numerical Estimation of Bidirectional Plant-Control Design Coupling in Control Co-Design.\' ASME IDETC 2024, IDETC-142636, to appear.
');
document.write('- Yong Hoon Lee, Saeid Bayat, James T. Allison, Md Sanower Hossain, D. Todd Griffith. \'Modeling and Control Co-design of a Floating Offshore Vertical-Axis Wind Turbine System\'. ASME IDETC 2024, IDETC-143495, to appear.
');
document.write('- Saeid Bayat, Nastaran Shahmansouri, Satya RT Peddada, Alex Tessier, Adrian Butscher, and James T Allison. \'Multi-split Configuration Design for Fluid-based Thermal Management Systems.\' ASME IDETC 2024, IDETC-143578, to appear.
');
document.write('- Saeid Bayat, Nastaran Shahmansouri, Satya RT Peddada, Alex Tessier, Adrian Butscher, and James T Allison. \'Advancing Fluid-Based Thermal Management Systems Design: Leveraging Graph Neural Networks for Graph Regression and Efficient Enumeration Reduction.\' ASME IDETC 2024, IDETC-143660, to appear.
');
document.write('- Saeid Bayat, Nastaran Shahmansouri, Satya RT Peddada, Alex Tessier, Adrian Butscher, and James T Allison. \'Extracting Design Knowledge from Optimization Data: Application to Multi-split Thermal Management System Configuration.\' ASME IDETC 2024, IDETC2024-143065, to appear.
');
document.write('- Dario Rodriguez, Tulio Ricciardi, James T. Allison, and Jonathan B. Freund. \'Conceptual Design and Optimization of a Scramjet with Ablative Thermal Protection System.\' AIAA AVIATION Forum 2024, to appear.
');
document.write('- Prajwal K. Chinthoju, Yong Hoon Lee, Ghanendra K. Das, Kai A. James, and James T. Allison. \'Optimal Design of eVTOLs for Urban Mobility using Analytical Target Cascading.\' In the Proceedings of the AIAA Scitech 2024 Conference, Orlando, FL, Jan 2024, USA. DOI: 10.2514/6.2024-2235.
');
document.write('- Nowsheen Sharmili, Yong Hoon Lee, and James T. Allison. \'Battery Thermal Management Systems Design Considering Model Fidelity Levels and Design Optimization Utility.\' In the Proceedings of the AIAA Scitech 2024 Conference, Orlando, FL, Jan 2024, USA. DOI: 10.2514/6.2024-2363
');
document.write('- Saeid Bayat and James T Allison. \'Control Co-Design With Varying Available Information Applied to Vehicle Suspensions.\' In the Proceedings of the ASME 2023 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference, Boston, MA, USA. DOI: 10.1115/DETC2023-114690
');
document.write('- Parrott, Corey and Peddada, Satya RT and Allison, James T and James, Kai. Machine Learning Surrogates for Optimal 2D Spatial Packaging of Interconnected Systems with Physics Interactions (SPI2). In the proceedings of the 2023 AIAA Aviation and Aeronautics Forum and Exposition, San Diego, CA and online, June 2023. DOI: 10.2514/6.2023-4375
');
document.write('- Vedant, Patrick Haddox, James T. Allison. \'Multifunctional Oscillating Structures for Slewing and Active Jitter Cancellation.\' In the proceedings of the 2023 IEEE Aerospace Conference, Big Sky MT, March 4-11 2023. DOI: 10.1109/AERO55745.2023.10115853
');
document.write('- Vedant, Patrick Haddox, James T. Allison. \'New Mission and Spacecraft Design Enabled Using MSAC.\' In the proceedings of the 2023 IEEE Aerospace Conference, Big Sky MT, March 4-11 2023. DOI: 10.1109/AERO55745.2023.10115834
');
document.write('- Abbas Bataleblu, Vedant, Saeid Bayat, and James T. Allison. “Control Implementation Challenges of HI-MSAC: Hinge Integrated Multifunctional Structures for Attitude Control,” In the proceedings of the 2023 AAS Guidance, Navigation, and Control Conference, Breckenridge, CO, USA, February 2023.
');
document.write('- Elena Fernandez Bravo, Vedant, Satya R.T. Peddada, and James T. Allison. \'Multifunctional Structures for Attitude Control (MSAC) Configuration Design Optimization using Pseudo-Rigid Body Dynamic Models (PRBDM).\' In the proceedings of the 2023 AAS Guidance, Navigation, and Control Conference, Breckenridge, CO, USA, February 2023.
');
document.write('- Abbas Bataleblu, Elena Fernandez Bravo, Vedant, James T. Allison. \'SPOAC and Hinge Integrated MSAC: Non-holonomic Attitude Control Systems for Spacecraft.\' In the proceedings of the 36th Annual Small Satellite Conference, Logan UT, August 6-11 2022.
');
document.write('- Vedant, James T. Allison. \'Reducing Jitter During Large Slews using Multifunctional Structures for Attitude Control.\' In the proceedings of the 2022 AAS Guidance, Navigation, and Control Conference, Breckenridge, CO, USA, February 2022. DOI: doi.org/10.2514/6.2021-1098
');
document.write('- Vedant, James T. Allison. \'Advancing MSAC Towards Flight Demonstration Using Hardware in the Loop Validation.\' In the proceedings of the 2022 AAS Guidance, Navigation, and Control Conference, Breckenridge, CO, USA, February 2022.
');
document.write('- Waheed B. Bello, Satya R.T. Peddada, Anurag Bhattacharyya, Mark Jennings, Sunil Katragadda, Kai A. James, James T. Allison. \'Underhood Spatial Packing and Routing of an Automotive Fuel Cell System Using 2D Geometric Projection.\' In the proceedings of the AIAA Scitech 2022 Conference, San Diego, CA (Hybrid Virtual), Jan 2022. DOI: 10.2514/6.2022-0804
');
document.write('- Anurag Bhattacharyya, Satya R.T. Peddada, Waheed B. Bello, Lawrence E. Zeidner, Kai A. James, James T. Allison. \'Simultaneous 3D Component Packing and Routing Optimization Using Geometric Projection.\' In the proceedings of the AIAA Scitech 2022 Conference, San Diego, CA (Hybrid Virtual), Jan 2022. DOI: 10.2514/6.2022-2096
');
document.write('- Athul K Sundarrajan, Yong Hoon Lee, Daniel R. Herber, James T. Allison. \'Open-Loop Control Co-Design of Floating Offshore Wind Turbines Using Linear Parameter-Varying Models.\' In the proceedings of the ASME 2021 International Design Engineering Technical Conferences. Virtual, Online. August 17-19, 2021. DOI: 10.1115/DETC2021-67573
');
document.write('- Satya RT Peddada, Larry Zeidner, Kai A James, James T. Allison. \'An Introduction to 3D SPI2 (Spatial Packaging of Interconnected Systems With Physics Interactions) Design Problems: A Review of Related Work, Existing Gaps, Challenges, and Opportunities.\' In the proceedings of the ASME 2021 International Design Engineering Technical Conferences. Virtual, Online. August 17-19, 2021. DOI: 10.1115/DETC2021-72106
');
document.write('- Satya RT Peddada, Nathan Dunfield, Larry Zeidner, Kai A James, James T. Allison. \'Systematic Enumeration and Identification of Unique Spatial Topologies of 3D Systems Using Spatial Graph Representations.\' In the proceedings of the ASME 2021 International Design Engineering Technical Conferences. Virtual, Online. August 17-19, 2021. Nominated for DAC Best Paper Award. DOI: 10.1115/DETC2021-66900
');
document.write('- Vedant, Allison, James T and Ghosh, Alexander M. Reducing jitter during large slews using multifunctional structures for attitude control via torque analysis. In AIAA Science and Technology Forum and Exposition, AIAA SciTech Forum 2021, 1-9, 2021. DOI: 10.2514/6.2021-1098
');
document.write('- Jason Jonkman, Alan Wright, Garrett Barter, Matt Hall, James Allison, Daniel Herber. \'Functional Requirements for the WEIS Toolset to Enable Controls Co-Design of Floating Offshore Wind Turbines.\' In the Proceedings of the ASME 2021 3rd International Offshore Wind Technical Conference. Virtual, Online. February 16–17, 2021. DOI: 10.1115/IOWTC2021-3533
');
document.write('- Satya R.T. Peddada, Albert E. Patterson, James T. Allison. \"Manufacturing Cell Adaption to Disruptive AM Processes: Convex Optimization Approach.\" In the Proceedings of the IISE Annual Conference, pp. 293-298. Institute of Industrial and Systems Engineers (IISE), Virtual Online, Nov. 1-3, 2020.');
document.write('
');
document.write('- Satya R.T. Peddada, Kai A. James, and James T. Allison. \'A Novel Two-stage Design Framework for 2D Spatial Packing of Interconnected Components.\' In the proceedings of the ASME 2020 International Design Engineering Technical Conferences, virtual. Invited for submission to ASME Journal of Mechanical Design. Nominated for DAC Best Paper Award. DOI: 10.1115/DETC2020-22695
');
document.write('- Satya R.T. Peddada, Samanta B. Rodriguez, Kai A. James, and James T. Allison. \'Automated Layout Generation Methods for 2D Spatial Packing.\' In the proceedings of the ASME 2020 International Design Engineering Technical Conferences, virtual. DOI: 10.1115/DETC2020-22627
');
document.write('- Vedant, James T. Allison. \'Impact of Including Electronics Design on Design of Intelligent Structures: Applications to Multifunctional Structures For Attitude Control (MSAC).\' In the proceedings of the 2020 ASME Smart Materials, Adaptive Structures and Intelligent Systems Conference, SMASIS2020-2331, Virtual, Online. September 15, 2020. DOI: 10.1115/SMASIS2020-2331
');
document.write('- Vedant, Albert E Patterson, James T Allison. \'Multifunctional Structures for Spacecraft Attitude Control.\' In the proceedings of the 2020 AAS Guidance, Navigation, and Control Conference, AAS 20-018, Breckenridge, CO, USA, Feb 2020.
');
document.write('- Tonghui Cui, James T. Allison and Pingfeng Wang. \'Reliability-based Co-Design of State-Constrained Stochastic Dynamical Systems.\' In the Proceedings of the 2020 AIAA/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, AIAA SciTech Forum, Jan 2020. DOI: 10.2514/6.2020-0413
');
document.write('- Daniel R. Herber, James T. Allison, Philip Abolmoali, Robert Buettner, and Soumya Patnaik. \'Architecture Generation and Performance Evaluation of Aircraft Thermal Management Systems Through Graph-based Techniques.\' In the Proceedings of the 2020 AIAA/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, AIAA SciTech Forum, Jan 2020. DOI: 10.2514/6.2020-0159
');
document.write('- Vedant, Alex Ghosh, Matthew West, James T. Allison. \'Reinforcement Learning for Spacecraft Attitude Control\'. In the proceedings of the 70th International Astronautical Congress, 21-25 October, 2019, Washington D.C.
');
document.write('- Vedant, Alex Ghosh, Oscar Alvarez-Salazar, James T. Allison. \'Impact of Strain-Actuated Attitude Control Systems for Variant Mission Classes\'. In the proceedings of the 70th International Astronautical Congress, 21-25 October, 2019, Washington D.C.
');
document.write('- Vedant, James T. Allison. \'Multifunctional Structures for Attitude Control.\' In ASME Smart Materials, Adaptive Structures and Intelligent Systems, SMASIS2019-5565, Louisville, KY, USA, Sep 2019. DOI: 10.1115/SMASIS2019-5565
');
document.write('- Tonghui Cui, James T. Allison, and Pingfeng Wang. \'A Comparative Study of Formulations and Algorithms For Reliability-based Co-Design Problems.\' In the proceedings of the ASME 2019 International Design Engineering Technical Conferences, Anaheim CA. DOI: 10.1115/DETC2019-98307
');
document.write('- Charul Chadha, Albert Patterson, Iwona Jasiuk, James Allison, and Kai James. \'Repair of High-value Plastic Components Using Fused Deposition Modeling.\' In the proceedings of the 2019 Annual International Solid Freeform Fabrication Symposium. Austin, TX, USA, Aug 2019.
');
document.write('- Vedant, James T. Allison. \'Pseudo-Rigid Body Dynamic Modeling of Compliant Members for Design.\' In the proceedings of the ASME 2019 International Design Engineering Technical Conferences, Anaheim CA. DOI: 10.1115/DETC2019-97881
');
document.write('- Albert Patterson, Yong Hoon Lee, James T. Allison. \'Overview of the Development and Enforcement of Process-Driven Manufacturability Constraints in Product Design.\' In the proceedings of the ASME 2019 International Design Engineering Technical Conferences, Anaheim CA. DOI: 10.1115/DETC2019-97384
');
document.write('- Albert Patterson, James T. Allison. \'Generation and Mapping of Minimally-restrictive Manufacturability Constraints for Mechanical Design Problems.\' In the proceedings of the ASME 2019 International Design Engineering Technical Conferences, Anaheim CA. DOI: 10.1115/DETC2019-97386
');
document.write('- Danny J. Lohan and James T. Allison. \'An Assessment of Structural Optimization Methods for Device-Level Heat Sink Design.\' In the proceedings of the 13th World Congress on Structural and Multidisciplinary Optimization, Beijing, China, May 20-24, 2019.
');
document.write('- Yong Hoon Lee, Vedant, Randy H. Ewoldt, James T. Allison. \'Strain-Actuated Solar Arrays for Spacecraft Attitude Control Assisted by Viscoelastic Damping.\' In the proceedings of the 13th World Congress on Structural and Multidisciplinary Optimization, Beijing, China, May 20-24, 2019.
');
document.write('- Tinghao Guo, Daniel R. Herber, James T. Allison. \'Circuit Synthesis Using Generative Adversarial Networks (GANs).\' In the proceedings of the AIAA 2019 Science and Technology Forum and Exposition, AIAA 2019-2350, San Diego, CA, USA, Jan 2019. Invited paper. DOI: 10.2514/6.2019-2350
');
document.write('- Tinghao Guo, Daniel R. Herber, James T. Allison. \'Reducing Evaluation Cost for Circuit Synthesis Using Active Learning.\' In the proceedings of the ASME 2018 International Design Engineering Technical Conferences, Quebec City, Quebec, CA. DOI: 10.1115/DETC2018-85654
');
document.write('- Albert Patterson, James T. Allison. \'Manufacturability Constraint Formulation for Design Under Hybrid Additive-Subtractive Manufacturing.\' In the proceedings of the ASME 2018 International Design Engineering Technical Conferences, Quebec City, Quebec, CA. DOI: 10.1115/DETC2018-85637
');
document.write('- Satya R.T. Peddada, Daniel R. Herber, Herschel C. Pangborn, Andrew G. Alleyne, and James T. Allison. \'Optimal Flow Control and Single Split Architecture Exploration for Fluid-Based Thermal Management.\' In the proceedings of the ASME 2018 International Design Engineering Technical Conferences, Quebec City, Quebec, CA. DOI: 10.1115/DETC2018-86148
');
document.write('- Daniel R. Herber, James T. Allison. \'A Problem Class With Combined Architecture, Plant, and Control Design Applied to Vehicle Suspensions.\' In the proceedings of the ASME 2018 International Design Engineering Technical Conferences, Quebec City, Quebec, CA. DOI: 10.1115/DETC2018-86213
');
document.write('- Zitao Liao, Danny J Lohan, Nathan C Brooks, James T Allison, and Robert C.N. Pilawa-Podgurski. \'Multi-Objective Optimization of Series-Stacked Energy Decoupling Buffers in Single-Phase Converters.\' COMPEL 2018, Padova, Italy. DOI: 10.1109/COMPEL.2018.8459929
');
document.write('- Chendi Lin, Dan Herber, Vedant, Yong Hoon Lee, Alexander Ghosh, Randy Ewoldt, James T. Allison. \'Attitude Control System Complexity Reduction via Tailored Viscoelastic Damping Co-Design.\' In the proceedings of the 2018 AAS Guidance & Control Conference, Breckenridge, CO.
');
document.write('- Yong Hoon Lee, Jonathon K. Schuh, Randy H. Ewoldt, and James T. Allison. \'Simultaneous Design of Non-Newtonian Lubricant and Surface Texture Using Surrogate-Based Optimization.\' In the proceedings of the AIAA 2018 Science and Technology Forum and Exposition, Jan 2018. DOI: 10.2514/6.2018-1906
');
document.write('- Tinghao Guo, Danny J. Lohan, Ruijin Cang, Max Yi Ren, and James T. Allison. \'An Indirect Design Representation for Topology Optimization Using Variational Autoencoder and Style Transfer.\' In the proceedings of the AIAA 2018 Science and Technology Forum and Exposition, Jan 2018 (invited). DOI: 10.2514/6.2018-0804
');
document.write('- Yong Hoon Lee, Rebecca E. Corman, Randy H. Ewoldt, James T. Allison. \'A Multiobjective Adaptive Surrogate Modeling Optimization (MO-ASMO) Framework Using Efficient Sampling Strategies.\' In the proceedings of the 2017 ASME International Design Engineering Technical Conferences, IDETC-67541, Cleveland, OH. DOI: 10.1115/DETC2017-67541
');
document.write('- Madhav Arora, Siyao Luan, Deborah Thurston, James T. Allison. \'Hybrid Procedure-Based Design Strategies Augmented With Optimization.\' In the proceedings of the 2017 ASME International Design Engineering Technical Conferences, IDETC-68348, Cleveland, OH, Aug 2017. DOI: 10.1115/DETC2017-68348
');
document.write('- Satya R.T. Peddada, Pamela J. Tannous, Andrew G. Alleyne, James T. Allison. \'Optimal Sensor Placement Methods for Active Power Electronic Systems.\' In the proceedings of the 2017 ASME International Design Engineering Technical Conferences, IDETC-68253, Cleveland, OH, Aug 2017. DOI: 10.1115/DETC2017-68253
');
document.write('- Daniel R. Herber, James T. Allison. \'Unified Scaling of Dynamic Optimization Design Formulations.\' In the proceedings of the 2017 ASME International Design Engineering Technical Conferences, IDETC-67676, Cleveland, OH, Aug 2017. DOI: 10.1115/DETC2017-67676
');
document.write('- Daniel R. Herber, James T. Allison. \'Nested and Simultaneous Solution Strategies for General Combined Plant and Controller Design Problems.\' In the proceedings of the 2017 ASME International Design Engineering Technical Conferences, IDETC-67688, Cleveland, OH, Aug 2017. DOI: 10.1115/DETC2017-67668
');
document.write('- Anand P. Deshmukh, Danny J. Lohan, James T. Allison. \'Design of a Reconfigurable Dynamic Testbed for Co-Design Method Validation.\' In the proceedings of the 2017 ASME International Design Engineering Technical Conferences, iDETC-67319, Cleveland, OH, Aug 2017. Selected as a \'Paper of Distinction\'. DOI: 10.1115/DETC2017-67319
');
document.write('- Siyao Luan, Madhav Arora, Deborah Thurston, James Allison. \'Developing and Comparing Alternative Design Optimization Formulations for a Vibration Absorber Example.\' In the proceedings of the 2017 ASME International Design Engineering Technical Conferences, IDETC-68337, Cleveland, OH, Aug 2017. Nominated for DFMLC best paper award. DOI: 10.1115/DETC2017-68337
');
document.write('- Anand P. Deshmukh, James T. Allison. \'Unrestricted Wind Farm Layout Design with Optimal Control Considerations.\' In the proceedings of the 2017 ASME International Design Engineering Technical Conferences, IDETC-67480, Cleveland, OH, Aug 2017. DOI: 10.1115/DETC2017-67480
');
document.write('- Tinghao Guo, Jiarui Xu, Yilin Dong, Neal E. Davis, James T. Allison. \'Network Analysis of Design Automation Literature.\' In the proceedings of the 2017 ASME International Design Engineering Technical Conferences, iDETC-67361, Cleveland, OH, Aug 2017. DOI: 10.1115/DETC2017-67361
');
document.write('- Danny Lohan, James T. Allison. \'Temperature Constraint Formulations for Heat Conduction Topology Optimization.\' In the proceedings of the 12th World Congress on Structural and Multidisciplinary Optimization, Braunschweig, Germany, June 5-9, 2017.
');
document.write('- Chendi Lin, Yong Hoon Lee, Jonathon Schuh, James Allison, Randy Ewoldt. \'Efficient Optimal Surface Texture Design Using Linearization.\' In the proceedings of the 12th World Congress on Structural and Multidisciplinary Optimization, Braunschweig, Germany, June 5-9, 2017. DOI: 10.1007/978-3-319-67988-4_48
');
document.write('- Pamela J. Tannous, Satya Peddada, James T. Allison, Thomas Foulkes, Robert P. Pilawa, and Andrew G. Alleyne. \'Dynamic Temperature Estimation of Power Electronics Systems.\' In the proceedings of the 2017 American Control Conference, Seattle, WA, May 2017. DOI: 10.23919/ACC.2017.7963482
');
document.write('- Anand P Deshmukh, Marlon E Mitchell, James T Allison. \'Integrating Model-Based Design and Physical Design Evaluation for Improved Design Education.\' In ASME 2016 International Design Engineering Technical Conferences, IDETC2016-59299, Charlotte, NC, USA, Aug 2016. DOI: 10.1115/DETC2016-59299
');
document.write('- Danny J. Lohan, Masanori Ishigaki, Ercan M. Dede, James T Allison. \'Combined Lumped and Continuum Parameter Design Optimization of Electro-Thermal Systems.\' In ASME 2016 International Design Engineering Technical Conferences, IDETC2016-60218, Charlotte, NC, USA, Aug 2016. Selected as a \'Paper of Distinction\'. DOI: 10.1115/DETC2016-60218
');
document.write('- Daniel R Herber, Tinghao Guo, James T Allison. \'Enumeration of Architectures With Perfect Matchings.\' In ASME 2016 International Design Engineering Technical Conferences, IDETC2016-60212, Charlotte, NC, USA, Aug 2016. DOI: 10.1115/DETC2016-60212
');
document.write('- Yong Hoon Lee Lee, Jonathon Schuh, Randy H. Ewoldt, James T. Allison. \'Shape Parameterization Comparison For Full-Film Lubrication Texture Design.\' In ASME 2016 International Design Engineering Technical Conferences, IDETC2016-60168, Charlotte, NC, USA, Aug 2016. DOI: 10.1115/DETC2016-60168
');
document.write('- Anand Deshmukh, James T. Allison, Deborah Thurston. \"Heuristics for Formulating Design Optimization Models: Their Uses and Pitfalls\'. In the 5th International Engineering Systems Symposium, CESUN 2016, Washington, D.C., USA, Jun 2016.
');
document.write('- Danny J. Lohan, Ercan M. Dede, James T. Allison. \'Topology Optimization Formulations for Circuit Board Heat Spreader Design.\' In 2016 AIAA Aviation and Aeronautics Forum and Exposition, Washington, DC, USA, June 2016. DOI: 10.2514/6.2016-3669
');
document.write('- Oscar S Alvarez-Salazar, Jack B Aldrich, James T Allison, Soon-Jo Chung. \'Strain Actuated Solar Arrays for Precision Pointing of Spacecraft.\' In 2016 AAS Guidance, Navigation, and Control Conference, Breckenridge, CO, USA, Feb 2016.
');
document.write('- Christian M Chilan, Daniel R Herber, Yashwanth Kumar Nakka, Soon-Jo Chung, James T Allison, Jack B Aldrich, Oscar S Alvarez-Salazar. \'Co-Design of Strain-Actuated Solar Arrays for Precision Pointing and Jitter Reduction.\' In AIAA 2016 Science and Technology Forum and Exposition, AIAA-2016-0162, San Diego, CA, USA, Jan 4-8 2016. DOI: 10.2514/6.2016-0162
');
document.write('- Lakshmi Gururaja Rao, James T. Allison. \'Generalized Viscoelastic Material Design with Integro-Differential Equations and Direct Optimal Control.\' In the Proceedings of the 2015 ASME International Design Engineering Technical Conferences & Computers and Information in Engineering Conference. ASME, August 2-5, 2015. DOI: 10.1115/DETC2015-46768
');
document.write('- Lakshmi Gururaja Rao, Jonathon Schuh, Randy H. Ewoldt, James T. Allison. \'On Using Adaptive Surrogate Modeling in Design for Efficient Fluid Power.\' In the Proceedings of the 2015 ASME International Design Engineering Technical Conferences & Computers and Information in Engineering Conference. ASME, August 2-5, 2015. DOI: 10.1115/DETC2015-46832
');
document.write('- James T. Allison, Daniel R. Herber, Anand P. Deshmukh. \'Integrated Design of Dynamic Sustainable Energy Systems.\' In the Proceedings of the 2015 International Conference on Engineering Design. July 27-30, 2015. ISBN: 978-1-904670-64-3
');
document.write('- Anand P. Deshmukh, Daniel R. Herber, James T. Allison. \'Bridging the Gap between Open-Loop and Closed-Loop Control in Co-Design: A Framework for Complete Optimal Plant and Control Architecture Design.\' In the Proceedings of the 2015 American Control Conference. July 1-3, 2015. DOI: 10.1109/ACC.2015.7172104
');
document.write('- Danny J. Lohan, Ercan M. Dede, James T. Allison. \'Topology Optimization for Heat Conduction Using Generative Design Algorithms.\' In the Proceedings of the 11th World Congress on Structural and Multidisciplinary Optimization. June 7-12, 2015.
');
document.write('- Ashish Khetan, James T. Allison. \'Large-Scale Topology Optimization Using Parameterized Boolean Networks.\' In the Proceedings of the 2014 ASME International Design Engineering Technical Conferences & Computers and Information in Engineering Conference. ASME, August 17-20, 2014. DOI: 10.1115/DETC2014-34256
');
document.write('- Jeff D. Arena, James T. Allison. \'Solving The Reconfigurable Design Problem For Multiability with Application to Robotic Systems.\' In the Proceedings of the 2014 ASME International Design Engineering Technical Conferences & Computers and Information in Engineering Conference. ASME, August 17-20, 2014. DOI: 10.1115/DETC2014-35314
');
document.write('- Daniel R. Herber, Jason W. McDonald, Oscar S. Alvarez-Salazar, Girish Krishnan, James T. Allison. \'Reducing Spacecraft Jitter During Satellite Reorientation Maneuvers via Solar Array Dynamics.\' In the Proceedings of the 2014 AIAA/ISSMO Multidisciplinary Analysis and Optimization Conference. AIAA, June 16–20 2014. DOI: 10.2514/6.2014-3278
');
document.write('- James Allison, Girish Krishnan and Deborah Thurston. \'Design of Engineering Systems in Industrial and Enterprise Systems Engineering Department at University of Illinois\'. In the Proceedings of the 4th International Engineering Systems Symposium, CESUN, Hoboken, NJ. June 8-11, 2014.
');
document.write('- Anand Deshmukh, James T. Allison. \'Design of Nonlinear Dynamic Systems using Surrogate Models of Derivative Functions.\' In the Proceedings of the 2013 ASME International Design Engineering Technical Conference, DETC2013-12262. Aug. 4–7, 2013. DOI: 10.1115/DETC2013-12262
');
document.write('- Daniel R. Herber, James T. Allison. \'Wave Energy Extraction Maximization in Irregular Ocean Waves using Pseudospectral Methods.\' In the Proceedings of the 2013 ASME International Design Engineering Technical Conference, DETC2013-12600. Aug. 4–7, 2013. Selected as DAC \'Paper of Distinction\'. DOI: 10.1115/DETC2013-12600
');
document.write('- N. Ashwin Bharadwaj, James T. Allison, Randy H. Ewoldt. \'Early-Stage Design of Rheologically Complex Materials via Material Function Design Targets.\' In the Proceedings of the 2013 ASME International Design Engineering Technical Conference, DETC2013-12262. Aug. 4-7, 2013. DOI: 10.1115/DETC2013-13462
');
document.write('- James T. Allison, Ashish Khetan, Danny Lohan. \'Managing Variable-Dimension Structural Optimization Problems using Generative Algorithms.\' In the Proceedings of the 10th World Congress on Structural and Multidisciplinary Optimization. May 19-24, 2013.
');
document.write('- Tinghao Guo, James T. Allison. \'On the Use of MPCCs in Combined Topological and Parametric Design of Genetic Regulatory Circuits.\' In the Proceedings of the 10th World Congress on Structural and Multidisciplinary Optimization. May 19-24, 2013.
');
document.write('- Anand P. Deshmukh, James T. Allison. \'Simultaneous Structural and Control System Design for Horizontal Axis Wind Turbines.\' In the Proceedings of the 9th AIAA Multidisciplinary Design Optimization Specialist Conference. Apr. 8-11, 2013. DOI: 10.2514/6.2013-1533
');
document.write('- James T. Allison, Daniel R. Herber. \'Multidisciplinary Design Optimization of Dynamic Engineering Systems.\' In the Proceedings of the 9th AIAA Multidisciplinary Design Optimization Specialist Conference. Apr. 8-11, 2013. DOI: 10.2514/6.2013-1462
');
document.write('- James T Allison, Allen Kaitharath, Daniel R Herber. \'Wave Energy Extraction Maximization Using Direct Transcription.\' In ASME 2012 International Mechanical Engineering Congress and Exposition, IMECE2012-86619, pp. 485-495, Houston, TX, USA, Nov 9-15, 2012. DOI: 10.1115/IMECE2012-86619
');
document.write('- James T. Allison. \'Plant-Limited Co-Design of an Energy Efficient Counterbalanced Robotic Manipulator.\' In the Proceedings of the 2012 ASME International Design Engineering Technical Conference, DETC2012-71108. ASME, Aug. 12–15 2012. DOI: 10.1115/DETC2012-71108
');
document.write('- James T Allison. \'Engineering System Co-Design with Limited Plant Redesign.\' In AIAA 2012 Multidisciplinary Design Optimization Specialist Conference, AIAA2012-1526, pp. 1-13, Honolulu, HI, USA, Apr 23-26, 2012. DOI: 10.2514/6.2012-1526
');
document.write('- James T. Allison and Zhi Han. \'Co-Design of an Active Suspension Using Simultaneous Dynamic Optimization.\' In the Proceedings of the 2011 ASME Design Engineering Technical Conference, DETC2011-48521. ASME, Aug. 28–Aug. 31 2011. DOI: 10.1115/DETC2011-48521
');
document.write('- James T. Allison and Sam Nazari. \'Combined Plant and Controller Design Using Decomposition-Based Design Optimization and the Minimum Principle.\' In the Proceedings of the 2010 ASME Design Engineering Technical Conference DETC2010-28887. ASME, Aug. 15–Aug. 18 2010. DOI: 10.1115/DETC2010-28887
');
document.write('- Erin MacDonald, Katie Whitefoot, James T. Allison, Panos Y. Papalambros, and Richard Gonzalez. \'An Investigation of Sustainability, Preference, and Profitability in Design Optimization.\' In the Proceedings of the 2010 ASME Design Engineering Technical Conference DETC2010-29055. ASME, Aug. 15–Aug. 18 2010.
');
document.write('- Michael J. Alexander, James T. Allison, Panos Y. Papalambros, and David J. Gorsich. \'Constraint Management of Reduced Representation Variables in Decomposition-Based Design Optimization.\' In the Proceedings of the 2010 ASME International Design Engineering Technical Conference DETC2010-28788. Aug. 15–18, 2010.
');
document.write('- Michael J. Alexander, James T. Allison, and Panos Y. Papalambros. \'Reduced Representations of Vector-Valued Coupling Variables in Decomposition-Based Design Optimization.\' In the Proceedings of the 8th World Congress on Structural and Multidisciplinary Optimization, Lisbon, Portugal, June 1–5, 2009.
');
document.write('- James T. Allison and Panos Y. Papalambros. \'Consistency Constraint Allocation in Augmented Lagrangian Coordination.\' In the Proceedings of the 2008 ASME Design Engineering Technical Conference DETC2008-49823. ASME, Aug. 3–Aug. 6 2008.');
document.write('
');
document.write('- James T. Allison, Michael Kokkolaras, and Panos Y. Papalambros. \'Optimal Partitioning and Coordination Decisions in Decomposition-based Design Optimization.\' In the Proceedings of the 2007 ASME Design Engineering Technical Conference DETC2007-34698. ASME, Sept. 4–Sept. 7 2007.
');
document.write('- James T. Allison and Panos Y. Papalambros. \'Optimal Partitioning and Coordination Decisions in System Design Using an Evolutionary Algorithm.\' 7th World Conference on Structural and Multidisciplinary Optimization, May 21–May 25 2007.
');
document.write('- Bryon Sohns, James T. Allison, Hosam Fathy, and Jeffrey L. Stein. \'Efficient Parameterization of Large-Scale Dynamic Models Through the Use of Activity Analysis.\' In the Proceedings of the 2006 ASME International Mechanical Engineering Congress and Exposition, Chicago, Il, Nov 5-10 2006.
');
document.write('- James T. Allison, Brian Roth, Michael Kokkolaras, Ilan Kroo, and Panos Y. Papalambros. \'Aircraft Family Design Using Decomposition-Based Methods.\' In the Proceedings of the 11th AIAA/ISSMO Multidisciplinary Analysis and Optimization Conference, Portsmouth, Virginia, Sept. 6-8 2006.
');
document.write('- James T. Allison, David Walsh, Michael Kokkolaras, Panos Y. Papalambros, and Matthew Cartmell. \'Analytical Target Cascading in Aircraft Design.\' In the Proceedings of the 44th AIAA Aerospace Sciences Meeting and Exhibit AIAA-2006-1326. AIAA, January 9-12 2006.
');
document.write('- James T. Allison, Michael Kokkolaras, and Panos Y. Papalambros. \'On the Impact of Coupling Strength on Complex System Optimization for Single-Level Formulations.\' In the Proceedings of the 2005 ASME Design Engineering Technical Conference DETC2005-84790. ASME, Sept. 24–Sept 28 2005.
');
document.write('- James T. Allison, Michael Kokkalaras, Marc Zawislak, and Panos Y. Papalambros. \'On the Use of Analytical Target Cascading and Collaborative Optimization for Complex System Design.\' In the Proceedings of the 6th World Conference on Structural and Multidisciplinary Optimization, May 30–June 3 2005.
');
document.write('
');
document.write('');
document.write('');